Home >

KELLY-KLS-N-SERIES : Kelly KLS-N Sealed Sinusoidal Wave Brushless DC Motor Controller
KELLY-KLS-N-SERIES : Kelly KLS-N Sealed Sinusoidal Wave Brushless DC Motor Controller




Peak/Continuous Current

CAN Bus Option


Description Manuals & Diagram
Kellyís programmable motor controllers provide efficient, smooth and quiet controls for electric motorcycles, golf carts and go-carts, as well as industrial motor control. It is mainly supposed to solve noise problems of BLDC motor driving application. The KLS-N motor controller must be based on hall sensors type. KLS-N controller can not support sensorless brushess motor for now. Compared to the traditional trapezoidal waveform control technology, this technique based on sinusoidal wave driving technology to reduce the operation noise and 1/3 switching loss, which well meets the noise reduction and efficiency requirements in the application of DC brushless motor. It uses high power MOSFETís and, SVPWM and FOC to achieve efficiencies of up to 99% in most cases. A powerful microprocessor brings in comprehensive and precise control to the controllers. It also allows users to adjust parameters, conduct tests, and obtain diagnostic information quickly and easily. People can program the KLS controller on PC software and Android App. There is one more choice for customers to program KLS controller now. The APP software is based on Tablet with Android OS. Customers may add a Z-TEK USB to RS232 cable for programming KLS controller if they want to use Android Tablet.

Both PC software and Android APP can provide one screen to monitor the controller parameters. Sometimes people can use a small Android Tablet as display device. Customers can connect the KLS controller to Android App in Android Phone if they order Bluetooth converter from Kelly Controls.

KLS-N has a friendly I/O terminals for customers to hook up the batteries and motor easily. The biggest difference is KLS-N is a waterproof type controller by default. It is IP66 rating.
Models: KLS2412N, KLS2412ND, KLS2418N, KLS2418ND, KLS2430N, KLS2430ND, KLS2435ND, KLS4812N, KLS4812ND, KLS4818N, KLS4818ND, KLS4830N, KLS4830ND, KLS4835ND, KLS4860NG, KLS4875NC, KLS48100NC, KLS48120NC, KLS7212N, KLS7212ND, KLS7215N, KLS7215ND, KLS7218N, KLS7218ND, KLS7222N, KLS7222ND, KLS7230N, KLS7230ND, KLS7235ND, KLS7260NG, KLS7275NC, KLS72100NC, KLS72120NC
Product Details

Kelly KLS-N Sinusoidal Brushless Permanent Magnet Motor Controller

ModelNominal VoltageMax Operating VoltagePeak Current**
1 Minute
Continuous CurrentPrice
KLS2412N12 V - 24 V9 V - 32 V140 A60 A96.03
KLS2412ND12 V - 24 V9 V - 32 V140 AUp to 100 A*96.03
KLS2418N12 V - 24 V9 V - 32 V220 A80 A/td>125.13
KLS2418ND12 V - 24 V9 V - 32 V220 AUp to 135 A*134.83
KLS2430N12 V - 24 V9 V - 32 V280 AUp to 90 A*144.53
KLS2430ND12 V - 24 V9 V - 32 V280 AUp to 160 A*154.23
KLS2435ND12 V - 24 V9 V - 32 V320 AUp to 165 A*173.63
KLS4812N36 V - 48 V27 V - 60 V140 A60 A96.03
KLS4812ND36 V - 48 V27 V - 60 V140 AUp to 100 A*96.03
KLS4818N36 V - 48 V27 V - 60 V220 A80 A125.13
KLS4818ND36 V - 48 V27 V - 60 V220 AUp to 125 A*134.83
KLS4830N36 V - 48 V27 V - 60 V280 A90 A144.53
KLS4830ND36 V - 48 V27 V - 60 V280 AUp to 160 A*154.23
KLS4835ND36 V - 48 V27 V - 60 V320 AUp to 165 A*173.63
KLS7212N48 V - 72 V36 V - 86 V140 A50 A115.43
KLS7212ND48 V - 72 V36 V - 86 V140 AUp to 100 A*125.13
KLS7215N48 V - 72 V36 V - 86 V200 A60 A134.83
KLS7215ND48 V - 72 V36 V - 86 V200 AUp to 105 A*144.53
KLS7218N48 V - 72 V36 V - 86 V220 A80 A154.23
KLS7218ND48 V - 72 V36 V - 86 V220 AUp to 125 A*173.63
KLS7222N48 V - 72 V36 V - 86 V250 A85 A173.63
KLS7222ND48 V - 72 V36 V - 86 V250 AUp to 130 A*193.03
KLS7230N48 V - 72 V36 V - 86 V280 A90 A193.03
KLS7230ND48 V - 72 V36 V - 86 V280 AUp to 150 A*193.03
KLS7235ND48 V - 72 V36 V - 86 V320 AUp to 165 A*222.13
*Depends on conductive heat sink.
**Peak current can be prolonged with additional heat sink, easily over 2 minutes.

ModelNominal VoltageMax Operating VoltagePeak Current
2 Minutes
Continuous CurrentPrice
KLS4860NG36 V - 48 V27 V - 60 V400 A160 A - 240 A222.13
KLS4875NC36 V - 48 V27 V - 60 V500 A200 A - 300 A290.03
KLS48100NC36 V - 48 V27 V - 60 V600 A240 A - 360 A387.03
KLS48120NC36 V - 48 V27 V - 60 V700 A280 A - 420 A484.03
KLS7260NG48 V - 72 V36 V - 86 V400 A160 A - 240 A290.03
KLS7275NC48 V - 72 V36 V - 86 V500 A200 A - 300 A387.03
KLS72100NC48 V - 72 V36 V - 86 V600 A240 A - 360 A484.03
KLS72120NC48 V - 72 V36 V - 86 V700 A280 A - 420 A581.03

General Functions

  • Extended fault detection and protection. Customers can read the error message in PC software or Android APP also.
  • Monitoring battery voltage. It will stop driving if the battery voltage is too high and it will progressively cut back motor drive power as battery voltage drops until it cuts out altogether at the preset Γ«£Low Battery VoltageΓ«• setting.
  • Built-in current loop and over current protection.
  • Configurable motor temperature protection range.
  • Current cutback at low temperature and high temperature to protect battery and controller. The current begins to ramp down at 90Γš‚ case temperature, shutting down at 100Γš‚.
  • The controller keeps monitoring battery recharging voltage during regen braking.
  • Maximum reverse speed and forward speed can be configured between 20% and 100% respectively and separately.
  • A 4pin connector to RS232 port and a Z-TEK USB to RS232 cable allows for configuration, programming and software upgrades using the tablet which must be based on Android OS now. People can do the same things on PC software by using a standard USB to RS232 cable instead.
  • Provision of a +5 volt and +12 volt output to supply various kinds of hall sensors.
  • 5 switch inputs which are activated by connection to 12V. Default to throttle switch, brake switch, reversing switch, forward switch and Boost switch.
  • 3 analog 0-5V inputs that default to throttle input, Brake analog input and motor temperature input
  • Copy signal of one of hall sensors.
  • Configurable boost switch. Enables the maximum output power achievable if the switch is turned on. The effect is the same as full throttle position even if you don't turn throttle at all.
  • 12V brake switch input used different port from motor temperature sensor. You can use both brake switch and motor temperature sensor functions at the same time on the latest version. Pin 25 is 12V brake switch input port.Pin1 is motor temperature sensor input port.
  • Optional joystick throttle. A bi-symmetrical 0-5V signal for both forward and reversing.
  • Configurable motor over-temperature detection and protection with the recommended thermistor KTY84-130/150 or KTY83-122.
  • 3 hall position sensor inputs. Open collector, pull up provided.
  • Brake analog regen mode. This regen mode doesn't need brake switch to support any more.
  • Enhanced regen brake function. A novel ABS technique provides powerful and smooth regen. The regen can happen at any speeds until zero speed.
  • KLS-N controller doesn't include the fuse and shunt on the case any more by default.
  • Cruise control. Only can be activated in forward direction.
  • KLS-N can support Broadcast type CAN Bus function. It is 250Kbps.CAN bus is not included in KLS-N controller by default.CAN bus is only an optional function for KLS-N.
  • Bluetooth function. Required a small Bluetooth converter which needs to be purchased in addition from our website. This small converter is only useful for KLS controller.


  • Intelligence with powerful microprocessor.
  • Synchronous rectification, ultra low drop, fast SVPWM and FOC to achieve very high efficiency.
  • Electronic reversing.
  • Voltage monitoring on 3 motor phases, bus, and power supply.
  • Voltage monitoring on voltage source 12V and 5V.
  • Current sense on all 3 motor phases.
  • Current control loop.
  • Hardware over current protection.
  • Hardware over voltage protection.
  • Configurable limit for motor current and battery current.
  • Low EMC.
  • Battery protection: current cutback, warning and shutdown at configurable high and low battery voltage.
  • Aluminum based PCB board with heat sink plate on the bottom of controller.
  • Waterproof connectors for small signal.
  • Thermal protection: current cut back, warning and shutdown on high temperature.
  • Controller can do auto_Identification angle for different degrees of hall sensors.
  • Configurable high pedal protection: the controller will not work if high throttle is detected at power on.
  • Current multiplication: Take less current from battery, output more current to motor.
  • Easy installation: 3-wire potentiometer will work.
  • Standard PC/Laptop computer to do programming. There is one more choice for customers to program KLS controller. Standard Tablet with Android OS to do programming. Need a Z-TEK USB TO RS232 cable for connecting the controller to App program in Tablet.
  • User program provided. Easy to use. No cost to customers.
  • Support motors with any number of poles.
  • Up to 70,000 electric RPM standard. (Electric RPM = mechanical RPM × motor pole pairs; Motor pole pairs = Motor poles ÷ 2).
  • Dust and water protected under sealed condition, IP66


  • Frequency of Operation: 10KHz or 20KHz.
  • Standby Battery Current: < 0.5mA.
  • 5V or 12V Sensor Supply Current: 40mA.
  • Supply Current, PWR, 30mA Typical.
  • Configurable battery voltage range, B+.
  • Standard Throttle Input: 0-5 Volts (3-wire resistive pot), 1-4 Volts (hall active throttle).
  • Throttle Input: 0-5 Volts. Can use 3-wire pot to produce 0-5V signal.
  • Full Power Operating Temperature Range: 0Γš‚deg;C to 70Γš‚deg;C (MOSFET temperature).
  • Operating Temperature Range: -40Γš‚deg;C to 100Γš‚deg;C (MOSFET temperature).
  • Max Battery Current: Configurable

Share your knowledge of this product with other customers... Be the first to write a review