VOLTAGE RANGE

24-48 V

STANDARD LEVEL

• Reset

Factory Set: 2.09 VPC

Range: 2-2.18 VPC

• Discharge

Factory Set: 1.73 VPC

Range: 1.56-1.82 VPC

TEMPERATURE

• Storage

-55°C to 85°C

• Operating

-20°C to 85°C

DIMENSIONS

Controller

• Length

113 mm

• Width

113 mm

• Depth

53 mm

DIMENSIONS

Battery Indicator

• Diameter

58 mm

• Depth

55 mm

Features

Purpose

Red LED

Notifies the user of energy reverse at the discharge of 75%

Lift Lockout @ 80% discharge

• The lift coil circuit is locked out and comes with optional warning signals located on other vehicles

• The lift is finished before lockout when discharge is reached during lift

Charge Detection

This feature recognizes whether the battery is improperly charged

EEPROM

Utilizes a non-volatile memory allows maintaining state-of-charge even after removal from a power source

Reset and Discharge Level

Both levels indicating lockout point are adjustable

Easy Installation

Mounting the device to a vehicle is easy. The following are the tools required:

• Controller: 2 pieces of ¼-inch bolts to the body of the vehicle

• Gage: a 2-1/16-inch round cut out to the dash

Features

Purpose

Model 1156

It is an LED gage with 10 bars that flashes to signify low fuel level

Dual Voltage

There are two voltages the user can choose from, which can be changed using jumpers

AV

Installable to any parts of the circuit of the lift coil. It has a maximum resistive load capacity of 150 VA on the secluded NC relay

• The AX output is close to the AW output, however, it closes at lockout and with NO relay

High Voltage Reset

While charging, the battery remains connected to the controller

Dual Voltage: Automatic Ranging

Adjusts automatically according to the correct system voltage