You are here: Home > Motors > Mars Motors > Brushless PM Motors
We found 4 results matching your criteria.
Brushless Permanent Magnet Motor. Also known as BLDC Motors. These Motors require special BLDC Controllers.
A BLDC motor has permanent magnets which rotate and a fixed armature, eliminating the problems of connecting current to the moving armature. An electronic controller replaces the brush/commutator assembly of the brushed DC motor, which continually switches the phase to the windings to keep the motor turning. The controller performs similar timed power distribution by using a solid-state circuit rather than the brush/commutator system.
Sort By:
Mars 0907(Etek Comparable) PMSM/BLDC Motor Mars 0913(Etek Comparable)PMSM/BLDC motor Mars 3601(Etek Comparable) PMSM/BLDC Motor
Do not need brush maintenance.
The motor is 90% efficient at voltages between 24 and 48 VDC.
Continuous current is 100 amps at 48 VDC. Max current is 300A.
This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap.
The voltage and torque constant is similar to the ME0709, but the ME0913 is more powerful.
The ME0913 motor is capable of 12 KW at 72 VDC (125 amps continuous), and 30 KW peak.
Kelly KLS4840D controller perfectly match with this motor.
Mars 4201(Etek Comparable) PMSM/BLDC Motor
The motor is 90% efficient at voltages between 24 and 72 VDC.
It is better for 72VDC operation.
Continuous current is 85 amps at 72 VDC. Max current is 300A.
Kelly KLS7240D perfectly match with this motor.