The AC 35 motor is designed for use in utility and light
automotive applications (up to 2250 lbs). It is capable of producing 63
horsepower at 2900 RPM while delivering 129 ft-lbs. of torque at 96
volts, and 650 amps(1238-7601). It is available in several different
configurations depending on your needs.
In addition to the AC 35 motor we are producing a second
version of the same motor size and calling it AC 36. This motor was
designed to extend the "knee" out further into the RPM range. So with
the same 96 volt/650 amp controller(1238-7601), the torque reduces a bit
down to 107 ft-lbs. of torque, the the horsepower increases to 65
horsepower with the knee extending out to 3800 RPM.
The motor identifications on this page have been changed to "AC 3X" to reflect the addition of the AC-35 into the AC-36 family.
The weight of this motor is around 85 pounds.
Link to power graphs: AC-35 POWER GRAPHS!!
Link to power graphs: AC-36 POWER GRAPHS!!
Here is a list of the typical applications for which this motor can be applied:
This motor can be manufactured as vented or non-vented
(enclosed). If you have a special need, please use the following email
link to contact us: hpev...@hpevs.com, or call us at 800-340-7107 and we will be more than happy to assist!
Included in the package with this motor is the controller of
your choice based on battery voltage, a auto conversion wiring harness, a
dash display and a Tyco contactor.
Of course all our systems are backed by an HPEVS and Curtis warranty.