Home > Motors > Motors By Type > Motors Series Wound > Motors Shaft Series Wound >   Motor Netgain WarP 9" "ImPulse" Double Shaft
	Our Price: $1,695.00 Sale Price: $1,575.00 You Save $120.00 Availability: If not in stock - usually ships from supplier in 2-3 Days Product Code: MO-00-08259 Shipping Information Additional Shipping Information*: Please Select Additional Shipping Information Shipping to a Business and no lift gate is required Shipping to a Business, a lift gate is required Shipping to a Residence, a lift gate is required Shipping to a Residence, a lift gate is not required    A Lift gate adds $100 to the Shipping cost. Shipping to a Residence adds $80 to the Shipping Two people Could manage to lift this item off the truck Shipping costs are only Estimates and most of the time are reduced after processing your order and adding the actual Shipping Charge! Qty:

Description Specifications   New WarP 9" "ImPulse" Up to 196 Volts Similar to picture shown But shorter The New WarP "ImPulse" 9" Motor is basically similar to the WarP 9" diameter series wound motor Only Shorter. Same Length of the 8" WarP Motor but with a higher power and efficiency rating. The benefits of the ImPulse 9 over the 8" motors is better performance.  This motor is better than the 8" motors it was designed to replace with HEAVY DUTY brushes and commutator used on the WarP 9 these parts are interchangeable with the WarP 9! Diameter: 9" Length: 14.69" Actual Weight: 135 Lbs. Bearing Type: Steel, Sealed, high temp Drive Bearing: 6207 Com Bearing: 6305 Commutator: Silver Interlocking, Resin Core Com Bars: 49 Spring #: 11880020 Brushes: 2 Required #10327002 Brush Type: Large Insulation: Class "H" Mounting Pattern: Same as ADC 8" & 9" DE Length: 1.250" DE Diameter: 1.1250" DE Keyway: 0.250" *0.130" DE Pilot Hole: 0.688" DIA DE Mounting Hole: 5/16"-18 CE Length: 2.150" CE Diameter: .705" CE Mounting Hole: 1/4-20 Case Steel: 1020 or similar Shaft Steel: 1144 stress proof WarP motors have a 1 year warranty. For More information visit the site Link Below. Netgain Technologies - Motor Specs 8" & 9" Motor Specifications

Related Products... Motor ADC (AMD - Advanced Motors & Drives) 6.7" #X91-4001 72-144VDC 10HP Double Shaft Sale Price: $899.00 Add Motor ADC (AMD - Advanced Motors & Drives) 6.7" #K91-4003 48-96VDC 8 HP Single Shaft Sale Price: $669.00 Add Motor ADC (AMD - Advanced Motors & Drives) 5.58" #140-07-4001 24-36VDC 2HP Single Shaft Sale Price: $465.00 Add Motor D&D ES-33 36-48 VDC Series Wound Single Our Price: $669.00 Add Motor ADC (AMD - Advanced Motors & Drives) 8" #203-06-4001 8" 72-144VDC 17.5HP Single Shaft Sale Price: $1,349.00 Add

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Motors > Motors By Type > Motors Series Wound > Motors Shaft Series Wound Motors > Motors By Manufacturer > WarP (Netgain) Motors Motors > Motors By Type > Motors Series Wound Motors > Motors By Manufacturer

	Battery Charger "Quick Charge" Portable 12V 25A $279.00
	Battery Charger "Quick Charge" Portable 12V 40A $426.00
	Conversion Package D&D ES-31 Motor, Curtis 72-120V 400A Controller $3,289.95
	Controller Kelly 12- 24 Volt 300 Amp PM Programmable Regen $239.00
	Alltrax Motor Speed Controller AXE4855 Programmable $485.00
	Alltrax Solenoid 72 Volt 400A Cont Contactor $129.95
	Battery Charger "Quick Charge" Portable 36V 40A With Select-A-Charge $555.00
	Charger "Quick Charge" Portable 16V 25A $308.00
	Axle,LH Gas '82-'88, Elec. RH mid '94 & Up, 16 3/4" $135.00