Controller Kelly PM 24-48 Volt With Regen
Select Amp Rating
Please use special RS232 cable we provide to program the controller. RS-232 cable: $19
Features
Intelligence with powerful microprocessor.
Synchronos rectification, ultra low drop, fast PWM to achieve very high efficiency.
Current limit and torque control.
Low EMC.
Battery protection: current cut back, shutdown and warning at low battery
Thermal enhanced rugged aluminum housing. Push-on connectors. Plated copper bus.
Thermal protection: Current cut back on low temperature and high temperature to protect battery and controller.
No adjustment required.
High side switch inputs to maximize safety.
Simple installation - uses a two wire 0-5K throttle pot.
Throttle or brake sensor open wire detection and protection.
High pedal protection: Disable operation if turning key on while throttle applied.
Configurable with RS-232. Windows GUI provided.(PLEASE USE SPECIAL CABLE SUPPLIED BY US)
Optional Features(Terminals available on back side)
PWMable Peak and Hold Main Contactor or Reverse Contactor Driver. Save energy and protect contactors!.
PWMable Reverse Alarm , SpeedO Meter or Battery Meter Output.
Brake Switch for regeneration.
Analog Brake Input for continuous variable regeneration.
Speed Control Switch to active speed control mode.
Throttle Foot Switch as safety feature.
Second Throttle Input (5K - 0K) as safety feature.
High Side Drive to armature to minimize EMC and maximize safety and reliability. (Promotion! Free of charge!)
Specifications
Frequency of Operation: 16.6kHz.
Standby Current: less than 15 mA.
Standard Throttle Input: 0-5k ohms ±10%(others available).
Full Power Operating Temperature Range:-30°C to 90 °C,100°C shutdown (controller temperature).
Armature Current Limit, 1 minutes: 500A
Armature Current Limit,Continuous: 200A
Peak and Hold Main contactor or Reverse Relay Driver: 3A peak, 1A hold.
Meter or Alarm Output: 200mA.
The max operating voltage of 24V-48V is 18V-57V.
|
