 |
 |
 |
|
Alltrax Controller Manual DOC File
Alltrax Software Program (.exe file)
Ideal Controllers for Electrathons, Scooters or other small EVs. Rated at 24-34 volt input systems, 300 amp output.
Fully programmable (comes pre-programmed with standard settings), download free software from the Alltrax web site, then attach your PC or laptop using windows XP with a straight through 9 pin RS232 serial cable to change settings or monitor voltages, amps, temperature, etc. Plug and play programming makes this controller an excellent choice for a wide variety of applications.
Matches Curtis 1204 footprint & size.
Weight: 5lb 2oz
Length: Box 7", Including tabs 8"
Height: 3"
Width: Box 4 1/2", Including base 5 3/4"
Owner's Manual and Wiring Diagram can be downloaded.
Key Benefits
Programmable interface
Fault tolerant control inputs
Epoxy potted/Waterproof
Calibration software included with purchase
Programming Functions:
Throttle ramp programming
Throttle response rate
Plug brake on/off, plug brake current
High pedal disable on/off
Battery over/under voltage cutback
Maximum output current
Specifications:
Operating Frequency: 18Khz
Throttle Input: 0-5K ohms, 5-0K ohms, 0-5 volts, and ITS (inductive throttle sensor)
Key Input Voltage: 8 volts to 1.5 times max battery volts
Quiescent Voltage: less than 75mA
Thermal Cutback: begins at 75C, 95C shutdown
Programming Interface: RS232 serial to host PC running freeware Windows XP interface
Current Limit: 300 amps
30 second rating: 300 amps
2 minute rating: 300 amps
5 minute rating: 200 amps
1 hour rating: 150 amps
Voltage drop @ 100 amps = <.10/<.20 volts
Weight: lb. 5.50
|
|
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
