84 Rated Volts
200 Amp Rated Current
14.39 kW Rated Power
29.04 kW Peak Power
45 Rpm/V Speed Constant
90% Peak Efficiency

The "pancake" design of the LEMCO permanent magnet brush-type DC motor provides a power-to-weight ratio and efficiency unmatched by conventional low-traction motors. It has been used in EVs ranging from go-karts and bicycles to on-road compact cars. This is the latest, second-generation design which we import directly from the Lynch Electric Motor Company (LEMCO) in England.


Good choice for EVs weighing from 400-1200 lbs.

Typical Performance for LEM-200:
The upper line of figures for each voltage refers to the maximum current at which the motor can run continuously at that voltage without overheating, under the following conditions:

The brush holder is adjusted to the optimum position for this load (which means that the motor must not be run at full load in the reverse direction unless it is fitted with means to move the brush holder when the direction of rotation is reversed).

48 volt maximum for applications requiring long term durability

Maximum current for 5 seconds is 400 amps at any voltage. For competition where greater current is required please consult Lmc Ltd, as certain modifications are advisable.

For applications involving long periods of running without maintenance the normal running current should not exceed 60% of the "maximum continuous" figure for the relevant voltage. This also applies where full-load operation in both directions is needed, unless a device is fitted to move the brush holder to the optimum position in each direction

Advantages Applications
High Efficiency
(Reduced Power Consumption) Scooters
Longer Battery Life Motorboats/Sail drives
Simple Control Lightweight Electric Cars
Light Weight Design Golf Cars
Power to Weight Ratio Go-Karts
Pancake Design Floor Sweepers
High Torque at Low Speed Grass Cutters
Pumps
Welding Generators

 

For more Details on this Motor please visit the Lynch Motor Company