• 4-Terminal Spade lugs for most all
  golf carts
  
• E-Z-GO models with 5-Pin ITS
  includes 4-Spade lugs
  
• Active Solenoid control
  
• Sealed OEM Connector available
  soon for select models

• Part Number SPM-48300

Note 1) SPM, SPB, EZ, and HD models have the same specifications as the parent model.

Note 2) The larger number represents the "Peak Amp Mode" when enabled in the Alltrax Controller
using Alltrax Tool-Kit software.  The controllers ship stock with this setting turned off and used for
racing or performance applications.

Test results from Dyno-meter using lab quality automated test equipment at 25'Celsius using Trojan
T105 batteries and 50amp supplemental power supply.

Type:  DC "SERIES WOUND" or PERMANENT MAGNET motor controller

Undervoltage cutback: adjustable, 16-30 VDC
Overvoltage shutdown: adjustable,

• 30-60 VDC (48V models) (60VDC MAX)
  
• 60-90 VDC (72V models) (90VDC MAX)
  

• SPM48xxx: 24-48V Nom, 62VDC Max
  
• SPM72xxx: 24-72V nom, 90VDC Max
  

• ITS (inductive, E-Z-GO)
  
• 0-1K Yamaha
  
• Resistive 0-5K ohm (+/-10%) 2-wire and 3-Wire
  
• Resistive 5K-0 ohm (+/-10%) Club Car
  
• 0-5Volt
  
• 6-10.5Volt (Taylor Dunn)
  
• USB Throttle (New - Software communication driven)
  
• Absolute mode (more info in the future...)
  

• Throttle acceleration / deceleration rate and map profile
  
• Armature current limit
  
• Brake current limit
  
• Under / Over voltage shutdown
  
• Half Speed Reverse
  
• High Pedal Disable
  
• Plug Brake