Throttle Assemblies & Grips

		DESCRIPTION* 7/8" 1" Premium Throttle Kit Twist Grip assembly w/ - 50" Wescon Conduit, premium slippery - 54" x 1/16" OD Wescon Cable, 7 x 7 aircraft Dummy Grip 2352 -- Economy Throttle Kit Twist Grip assembly w/ - 54" x 1/16" OD Cable & 50" unlined Conduit Dummy Grip 2359 -- Cableless Throttle Kit Twist Grip assembly w/o cable/conduit Dummy Grip 2350 -- Matching Dummy Grips Only 2349 2348 Foam Dummy Grips Only 2347
		* Our economy kit (#2359) is almost identical to our premium kit (#2352). Both use the same twist grip components, but the economy kits use a vinyl-covered steel conduit without a polyethylene inner liner. If your application does not require the low-friction advantage or the more severe routing capability provided by the premium, slippery, lined Wescon conduit used in our Premium Kit, the #2359 twist grip and conduit throttle assembly provides a quality, cost-saving substitute.

---

Brake Levers

			DESCRIPTION PART NO. Brake Lever, 7/8" ID 1731 Replacement Adjuster 2371

Foot Pedals

		DESCRIPTION PART NO. Brake Pedal 1806 Throttle Pedal 1811

---

Control Rods

			DESCRIPTION PART NO. Brake Rod, 1/4 x 40-1/2"*, 1/4-28 Thread 8218 Throttle Rod, 1/4 x 30"*, 1/4-28 Thread w/Hole 8216
		*O.E.M.s: We can manufacture to your specifications. Minimum quantities may apply.

---

Throttle Control Rod Kit

		DESCRIPTION PART NO. Complete Kit (incl. Throttle Rod) 2280 Complete Kit less Throttle Rod (pictured, right) 2278 Complete Kit Components Throttle Rod, 1/4 x 30", 1/4-28 Thread w/Hole 8216 Wire Stop 2360 Spring, 1/4 x 1-7/8 2383 Throttle Cable Assembly - 50" x 54" 1751 Hex Nut, 1/4-28 8500 Tinnerman Nut 8505 Nylon Cable Guide 2381

---

Brake Control Rod Kit

			DESCRIPTION PART NO. Complete Kit (incl. Brake Rod) 2281 Complete Kit less Brake Rod (pictured, left) 2279 Complete Kit Components Brake Rod, 1/4" x 40-1/2", 1/4-28 Thread 8218 Clevis, Forged 1/4-28 8354 Clevis Pin, with Hole 8355 Cotter Pin, 1/16" x 1/2" 8419 Tinnerman Nut 8505

Control Cables

		TYPE CABLE LENGTH CABLE OD CONDUIT LENGTH END CAP OD PART NO. Throttle 54" 1/16" 50" .210 1751 Brake 64" 5/64" 60" .370 1752 Brake 56" 5/64" 52" .370 1753

]

---

Wescon Cable & Conduit – Pre-Cut & Bulk

			DIAMETER LENGTH FOR CONDUIT 7 x 7 TYPE 1 x 19 TYPE 3/64 54" 3/16 2306 2307 3/64 64" 3/16 2327 –– 3/64 84" 3/16 2328 2304 3/64 120" 3/16 2308* –– 1/16 54" 7/32 2301 2302 1/16 96" 7/32 2329 2300 1/16 96" 7/32 –– 2330** 5/64 56" 1/4 2326 –– 5/64 60" 1/4 –– 2305 5/64 84" 1/4 –– 2303 3/32 68" 9/32 –– 2331 * Part No. 2308 has a barrel end. ** Part No. 2330 has a stainless steel hex end for applications near heat. DIAMETER FOR CONDUIT 7 x 7 TYPE 1 x 19 TYPE 3/64 3/16 2343 2344 1/6 7/32 2340 2341 5/64 1/4 –– 2342		DIAMETER* LENGTH FOR CONDUIT PART NO. 3/16 50" 3/64 2318-50 3/16 58" 3/64 2318-58 3/16 78" 3/64 2318-78 7/32 50" 1/16 2314-50 7/32 92" 1/16 2314-92 1/4 54" 5/64 2315-54 1/4 78" 5/64 2315-78 9/32 60" 3/32 2322-60 9/32 66" 3/32 2322-66 Wescon Conduit is available in any length. Please ask for a quote. DIAMETER* FOR CABLE PART NO. 3/16 3/64 2318 7/32 1/16 2314 1/4 5/64 2315 9/32 3/32 2322 *See Compatibility Chart below for Actual Dimensions.

---

Compatibility Chart - Conduit, Cable & Fittings

		CONDUIT PART NO. 2318 2314 2315 2322 SPECS: Nominal Size Conduit Diameter Cover OD sp 3/16 .187 .218 sp 7/32 ..218 .255 sp 1/4 .250 .278 sp 9/32 .280 .310 USE: Description/Cable Size Conduit Clip For 7/8" Tube (Part No.) For 1" Tube (Part No.) Conduit Clamp (Part No.) Conduit Retainers (Part No.) " " Conduit Button (Part No.) Twist Grip Adapter (Part No.) sp 3/64 1 2374 2377 2379 –– –– –– –– 2381 sp 1/16 1 2375 2377 2379 2372 2373 2386 2369 –– sp 5/64 1 2375 2377 2380 –– –– 2387 2370 –– sp 3/32 1 –– –– 2380 –– –– –– –– 2394

Wire Stops OD ID LENGTH FOR CABLE PART NO. 1/4 8-32 3/8 thru 3/32 2360   Wire Swivels OD ID LENGTH CONDUIT PART NO. .437 x .312 .225 x .100 3/4 3/16 2361

---

		Clevises HOLE WIDTH LENGTH FOR CABLE PART NO. 1/4 1/2 1-1/8 thru 3/32 2366 1/16 3/8 1-1/4 thru 1/16 8157

---

		Ball Adapters (3/16 ball) OD LENGTH FOR CABLE PART NO. 1/4 1/4 thru 3/32 2365 1/4 3/8 thru 3/32 2362 9/32 1/4 thru 3/32 2363 3/8 3/8 thru 3/32 2364

---

		Springs OD ID LENGTH CONDUIT PART NO. .350 1/4 1-7/8 7/32 2383 .350 1/4 2-1/4 7/32 2392 .350 1/4 3 7/32 2391 .438 5/16 3-1/8 1/4 2390

[

---

		Conduit Buttons OD ID LENGTH CONDUIT PART NO. .316 .260 3/4 7/32 2369 .375 .290 3/8 1/4 2370 Cable Guides/Twist Grip Adapter OD ID LENGTH CONDUIT PART NO. .437 x .312 .225 x .100 3/4 3/16 2381 .437 x .312 .275 x .100 7/8 9/32 2394

---

		Conduit Retainers - Straight OD ID LENGTH CONUDIT PART NO. 5/16-24 .260 2 7/32 2386 5/16-24 .287 2 1/4 2387 Conduit Retainers - Stepped OD ID LENGTH CONDUIT PART NO. 5/16-24 .260 1 7/32 2372 1/4-28 .260 1-1/2 7/32 2373 Conduit Retainers - Adjustable Stepped OD ID LENGTH CONDUIT PART NO. 5-16-18 .312 1-1/4 1/4 2371

---

		Conduit Clamps OD ID LENGTH CONUDIT PART NO. -- 7/32 -- 3/16 & 7/32 2379 5/16-24 1/4 -- 1/4 & 9/32 2380 Conduit Clips OD ID LENGTH CONDUIT PART NO. 7/8" Tube -- -- 3/16 2374 7/8" Tube -- -- 7/32 & 1/4 2375 1" Tube -- -- 7/32 & 1/4 2377

---

		Control Rod Anchors - Part No. 8182
		Uniformly stamped from 1/8" steel. Easily welded anywhere on a kart or other vehicle frame where a guide or support is needed. 1/4" hole for rods or other fittings.