Throttle Parts

You are here: Home > Throttles & Parts > Throttle Parts

We found 5 results matching your criteria.

Parts used for replacement or to build your own Throttle

Sort By:

Lever 0-5K Curtis Style for PB-5/6 Potentiometer

This is a Stock Item - Usually Ships upon order
Our Price: $2.95

13 in stock!

Lever 0-5K Curtis Style for PB-5/6 Potentiometer

Pot 0-5K Curtis Style for PB-5/6 Potentiometer

This is a Stock Item - Usually Ships upon order
Our Price: $19.95

20 in stock!

Pot 0-5K Curtis Style for PB-5/6 Potentiometer

With a ohm meter attached, you will read 0 resistance at the start. The resistance stays at O for a portion of the turn and then will start reading a resistance. This point is the start of the "Sweep". As you advance further the resistance increased until it reads about 4.95 which is actually full Throttle on all Controllers.

The Pot will then stay at 4.95K until you reach the full stop. You must set the pot in the box and adjust the start point to when the pot starts to read resistance You will then have full resistance at about 90 degrees of rotation

Project Box 3" x 2" x 1"

This is a Stock Item - Usually Ships upon order
Our Price: $5.95

3 in stock!

Perfect to make your own throttle or other applications. Black ABS plastic project enclosure. Interlocking lid secured with self-tapping screws. Interior slots for pc boards. Outside dimensions: 3" x 2" x 1"

Spring 0-5K Curtis Style for PB-5/6 Potentiometer

This is a Stock Item - Usually Ships upon order
Our Price: $1.99

69 in stock!

Spring 0-5K Curtis Style for PB-5/6 Potentiometer

Throttle Wire 3 Conductor with Shield

This is a Stock Item - Usually Ships upon order
Our Price: $0.39

42 in stock!

Sold by the foot.
22 AWG stranded color-coded, conductors. 100% foil shield with drain. Gray PVC jacket. For data communication, computer hook ups, audio and instrumentation.


	1